After receiving your Architectural and Structural plans, as well as any relevant details, we familiarize ourselves with the project, and confirm that we have all necessary information.
Using the provided plans, we draw every line in AutoCAD, and place dimensions.
Your PDF Crete Sheet(s) will be emailed to you.
Our Process
Want an example?
Sample Foundation Plan (Courtesy of Neale Engineering Ltd.)
Your Structural Plan may look something like this.
It should show footing schedules/dimensions, pad schedules/dimensions, and wall measurements
Sometimes, it may require that you reference section details that are on other pages.
Likely, you will also be using architectural drawings, flipping back and forth between all of these pages to piece together your lumber puzzle.
Sample Footing Plan (Crete Sheets)
This is one of our Crete Sheets.
Using the information in the sample Foundation Plan, we created a Footing Plan.
It shows solid lines for walls, and dashed lines for footings - just like a typical structural drawing, only this plan has dimensions for each footing line.
Using this plan, and our recommended cut instructions, even the least experienced worker could build this.
3D model of Sample Footing
Liability
Our plans are to be used IN ADDITION to your original drawings. They do not replace or supersede the architectural or structural plans.
ALWAYS refer to the drawings you were originally given for critical information or details.
Crete Sheets is not liable for failed inspections should our plans happen to be missing something or be misread.